Sierra MatchKing .22 Caliber .224 90gr HPBT Bullets /50

Sierra MatchKing .22 Caliber .224 90gr HPBT Bullets /50

The 22 caliber 90 grain Hollow Point Boat Tail was created in response to the increasing demands of Long Range shooters. With the success of the AR-15/M16 rifles in Long Range competition, the need was felt to maximize the ballistic potential of these rifles. The 90 grain MatchKing® is the final product of a series of tests, covering both accuracy and exterior ballistics, to arrive at the best possible bullet for the Long Range competitor. Designed specifically for the .223 Remington / 5.56x45mm cartridge, the 90 MatchKing® is at equally at home in both Match and Service Rifles. Due to the inherent requirements for a bullet of this type, the 90 grain MatchKing® is intended for single loading, and is not intended to be fed from a magazine.

While they are recognized around the world for record-setting accuracy, MatchKing® and Tipped MatchKing® bullets are not recommended for most hunting applications. Although MatchKing® and Tipped MatchKing® bullets are commonly used for varmint hunting, their design will not provide the same reliable explosive expansion at equivalent velocities in varmints compared to their lightly jacketed Hornet, Blitz or Varminter counterparts.

Sierra recommends a 6.5” twist barrel for the #9290 22 cal 90 gr HPBT bullet when pushed at muzzle velocities lower than 2650 fps. In cartridges like the Valkyrie with muzzle velocities above 2650 fps, a 1×7” twist barrel will stabilize the bullet correctly.

Sierra MatchKing
.22 Caliber .224
90 Grain HPBT Hollow Point Boat Tail
Sectional Density: 0.256
Ballistic Coefficients and Velocity Ranges: .563 @ 2080 fps and above .550 between 1640 and 2080 fps .480 between 1640 and below
Manufacturer: Sierra Bullets, Inc.
MPN: SIE9290T
Pieces: 50

About the Manufacturer
For over 60 years Sierra Bullets in Sedalia Missouri has been dedicated to the manufacture of the most accurate bullets in the world. This commitment to performance has established a "Tradition of Precision" for which Sierra is known throughout the world.

Some of the most important quality control standards used are:
1. Weight Control of +/- 0.3 grain.
2. Jacket concentricity of 00" to 03" on target bullets and 00" to 06" on hunting bullets.
3. 100% final visual inspection for external defects. 4. Roving quality control inspectors perform other dimensional checks at the cupping, draw, trim and bullet assembly operations.

In order to accomplish accuracy firing tests, Sierra utilizes our 300- meter underground testing range daily. 200-yard accuracy evaluations are conducted on rifle bullets using a precision unrestricted machine rest. They also conduct daily 50-yard accuracy evaluations on our pistol bullets using a specially designed machine rest. If a group does not meet their high expectations, the production run is rejected.
MPN: 9290T