PMC XTAC 7.62x51 NATO 147gr FMJ BT Ammunition /20

PMC XTAC 7.62x51 NATO 147gr FMJ BT Ammunition /20

Manufactured to the exacting specifications required by such organizations and demanded by our customers, X-TAC is the choice for the professional and enthusiast alike. At PMC, we know your job demands that you think of everything. But we also know that when the chips are down you shouldn’t be thinking about your ammunition.

PMC XTAC
7.62x51 NATO
147 Grain Full Metal Jacket BT

Velocity: (feet per second)
Muzzle: 2800
100 Yds: 2593
200 Yds: 2397
300 Yds: 2210
400 Yds: 2034
500 Yds: 1866

Muzzle Energy: 2611 ft-lbs
Ballistic Coefficient: 0.398
Bullet Length: 1.16
Sectional Density: 0.22
MPN: 7.62X
20 Rounds Per Box (500 Rounds Per Case)

About the Manufacturer
Complete Quality Control
Our supplier’s vertical integration philosophy allows for very reliable quality control of every PMC component each step of the way in the manufacturing process.

Because PMC’s supplier produces every component in the manufacturing of all center fire pistol and rifle cartridges, it does not rely upon the quality control of other manufacturers.

All PMC sporting ammunition is produced to either SAAMI or US Military Specification standards (MIL SPEC). PMC quality control is governed by the highly sought after ISO Bureau Veritas quality certification standards.

PMC Brass and Primers
PMC ammunition is loaded in new brass cases with boxer primers. The ammunition is non-corrosive and is loaded to SAAMI specifications with the exception of 50A, 5.56X and 5.56K. Each of these rounds complies with MIL SPEC.

All PMC ammunition is reloadable. Rifle ammunition may have crimped military primers. In reloading, the crimped first needs to be removed before a new primer can be inserted. Most major reloading companies can provide a tool to accomplish this operation.

Supply Chain Management
PMC’s supplier owns and operates the brass mill that produces the brass strip from which all brass cartridge cups are made.

Manufacturing all sporting ammunition in-house means not only that our supplier controls the total product quality, but also that our supplier is not dependent on other ammunition component manufacturers when shortages may occur.