What's On Sale?

fn 57 brass and bulletsHey we like bargains too! If our suppliers offer us a discount, we will pass it on to you. Shop On Sale!

Reloading Supplies

223 brass bullet comboLooking for brass, bullets, dies for your reloading press or reloading tools? Shop Reloading

Sights, Electronics and Accessories

Shopping Cart

0 item(s) - $0.00
Your shopping cart is empty!
Welcome visitor you can login or create an account.

Aimpoint CompM4 2 MOA ACET Red Dot Reflex Sight

Aimpoint CompM4 2 MOA ACET Red Dot Reflex Sight
Aimpoint CompM4 2 MOA ACET Red Dot Reflex Sight Aimpoint CompM4 2 MOA ACET Red Dot Reflex Sight Aimpoint CompM4 2 MOA ACET Red Dot Reflex Sight Aimpoint CompM4 2 MOA ACET Red Dot Reflex Sight Aimpoint CompM4 2 MOA ACET Red Dot Reflex Sight
CompM4 2 MOA ACET Red Dot Reflex Sight
Manufacturer Aimpoint
MPN: 11972
Availability: 66
Location: Warehouse 1
MSRP: $988.00
Our Regular Price: $889.00
Our Sale Price: $591.67 (save 40 %)
Qty:  
Warning this product is known to the state of California to cause [cancer] [birth defects or other reproductive harm].

Aimpoint CompM4 2 MOA ACET Red Dot Reflex Sight

The electronic components in the CompM4 improve upon Aimpoints existing state-of-the-art ACET diode circuitry, allowing this sight to run constantly for over 8 years on a single AA battery. The CompM4 features an internal voltage regulator that allows the sight to operate on any AA size battery available worldwide. This sight features a 2 minute-of-angle (MOA) dot size, making it perfectly suited for use with Aimpoints 3X Magnifier scope module. The CompM4 is optimized for use with all generations of night vision devices, and features an extremely rugged and easy to use 16-position manual switch with 7 night vision compatible settings and 9 daylight settings. The CompM4 sight body is designed to protect both the optics and adjustment components against hard use, and is waterproof to 45 meters (150 feet).

The CompM4 also features an improved QRP2 Picatinny rail mount, eliminating the need for a separate mounting ring. This mount has over twice the clamping force of the original QRP, and features a lower and wider torque limiting knob to improve ease of use and lessen the chance of the sight base becoming snagged on other equipment. The mount is keyed into the sight to absorb recoil forces. Vertical and cantilever spacers are available to allow the sight to fit on all M16 rifle and M4 carbine variants. The sight can also be used on any other weapon with a Picatinny rail mounting system.

- System Passive Red Dot Collimator Reflex Sight
- Magnification: 1X
- Eye Relief: Unlimited
- Reticle: Size 2 MOA
- Optical coating - Anti Reflex coating all surfaces. Multi-layer coating for reflection of Pass coating for NVD compatibility



Unique features
- High battery compartment
- Compatible with every generation of NVD
- ACET technology allows up to 80,000 hours (over 8 years) of daytime operation on one AA battery
- Internal voltage regulator allows the CompM4 to be used with any AA size battery
- 7 NVD settings and 9 daylight settings
- QRP2 mount has twice the clamping force of the original QRP, and the mounting knob is wider and shorter to improve operation and lower the risk of snagging on other gear
- Mount base is keyed into to the body of the sight to absorb recoil
- Mount base screws directly into the sight – no separate sight ring required.
- 500,000 hours of use on NVD setting
- 2 MOA dot for close combat and long distance engagement
- Matches perfectly with Aimpoint® 3XMag
- Unequalled light transmission
- Front lens opening is threaded for addition of killFlash® anti-reflective device
- Submersible to 150 feet (45 meters)
- Vertical spacer included
- Type classified as the U.S. Army’s new M68CCO
- Improved adjustment caps are easier to remove and protected against impact
- Can be used with a carry handle adapter for use on all M16 rifles
- Mechanical switch for speed and reliability

Mechanical Data:
- Length sight only: 120 mm (4 3/4")
- Length conf: 135 mm (5 5/16")
- Width: 72 mm (2 13/16")
- Height sight only: 60 mm (2 3/8")
- Height conf: 72 mm (2 13/16")
- Weight sight only (incl battery): 268 g (9,4 oz)
- Weight conf: 376 g (13,2 oz) incl. Lens Covers, Kill-Flash, Mount, and Spacer
- Housing material: High Strength Aluminum
- Housing finish and color: Matte black
- Housing anodized: Yes
- Material mount and spacer std conf: High Strength Aluminum
- Surface treatment: Hard anodized, matte
- Height of optical axis - sight and mount: 30 mm (1 3/16") over top surface of - - - - - - - Picatinny/Weaver Rail
- Height of optical axis - sight, mount and Micro spacer: 39 mm (1 9/16") over top surface of Picatinny/Weaver Rail
- Adjustment: Range ±2 m at 100 meters (±2 yds at 100 yds) in windage and elevation, 1 click = 16 mm at 100 meters = 13 mm at 80 meters = 9/16" at 80 yds

Electronic Data:
- Battery Type: AA
- Battery Life, typical** 80,000 hours for good quality battery
- Switch, dot brightness 16 positions, 7 NVD, 9 daylight, of which 1 Extra bright

About the Manufacturer

The Aimpoint Philosophy

When the time comes to shoot, there should be absolutely no question that you can count on your sight to perform.

We believe that a weapon sight should simplify aiming while meeting the highest possible requirements for reliability and ruggedness.

We know that conditions in the field place extreme demands on your equipment, so we design and test Aimpoint products to stand up to any conditions you are likely to encounter.

We also design our products to operate constantly for years on a single battery so your sight will always be ready whenever you need it.

Shooting conditions put unique demands on your equipment and when it comes to accuracy, the first priority is the right sight.

Aimpoint’s breakthrough technology allows a shooter to do what comes naturally — keep both eyes open while focusing on a target. When a shooter looks into an Aimpoint sight, a red dot appears in the lens. The shooter can then quickly superimpose the red dot on the target.

When the red dot is on the target, you’re on target. It is this combination of speed of sighting and accuracy that makes Aimpoint sights the preferred choice for beginners and experts alike.

Aimpoint red dot sights are made without magnification or optical distortion. In a red dot sight, the dot is not projected on to the target, it is only seen inside the sight and only by the shooter. Lasers project the reticle on to the target which makes the dot visible on the target.

The red dot sight uses a LED (light emitting diode) which is completely safe for the eyes compared to a laser that create a reticle with a laser emission, which can be harmful to your eyes.

Red dot sights are also superior to iron sights and magnifying scopes in several ways. Using these other types of aiming devices require that your focus leaves the target.

Regardless of where you position your eye, the reflection of the LED is always parallel with the sight’s optical axis, thanks to the design of the double lens and its light refraction property. The points of aim and impact always coincide.

Review This Product!

Your Name:

Your Review: Note: HTML is not translated!

Rating: Bad            Good